Components and accessories

This trim will make it easier to install wall panels even without a notched foundation. Also helps seal the bottom of the building better than the foam closure strips that are standard on our buildings. The color will match the rest of the trim or wall panels.

These steel members span the lenght of the building between frame lines on the walls. The wall panels are fastened to these members and provide the strenght and framework of the walls. They are pre-punched "Z" shaped with a yield strengh of 55,000psi and fabricated in 12, 14, and 16 gauge depending on the building loads. They are coated with a durable primer that will protect the steel from rust and corrosion.

These steel members span the lenght of the building between frame lines on the roof. The roof panels are fastened to these members and provide the strenght and framework of the roof. They are pre-punched "Z" shaped with a yield strengh of 55,000psi and fabricated in 12, 14, and 16 gauge depending on the building loads. They are coated with a durable primer that will protect the steel from rust and corrosion.

These steel members span the lenght of the building between frame lines on the roof at the eaves. They are pre-punched "C" shaped with a yield strengh of 55,000psi and fabricated in 12, 14, and 16 gauge depending on the building loads. They are coated with a durable primer that will protect the steel from rust and corrosion.

Wind columns are used when either standard X-Bracing is not enough or when door openings are in bays where X-Bracing would normally be. A wind column is basically an "I" beam that bolts to the rigid frame to add strenght and rigidity.

Portal frames are used when you have the same situation as a wind column, but a wind column does not provide enough support. Portal frames are very heavy frames that connect two rigid frames and increase the lateral support greatly.

X-Bracing is used in buildings to provide addition bracing and strength. This can be done with steel cables, rods or even angle in severe cases.

A proven performer, the clearspan rigid frame offers you incredible strength, durability, versatility and economy. The RF System offers the most practical solution to most ordinary building requirements from 50' through 120'.

The RFMS System offers the most economical cost per square foot of coverage when spans over 80' are required and interior column supports are not objectionable. Spans of up to 400' are available with multiple interior column spacings.

The SS System offers a wide range of uses from shopping centers, to large office complexes. Together with fascia systems and parapetwalls, exquisite building lines can be achieved for a pleasing architectural treatment. The SS System may also be used as a wing unit, or addition to an existing building.

These panels are our most popular seller. They are manufactured with a yeild strengh of 80,000psi along with a superior profile to provide a very strong and economical panel. The base metal is galvalume, which is a zinc/aluminum coating to prevent corrosion. We also offer a 30 Year Paint Warrantee which is rare in the industry.

These panels are also popular and with a unique profile. They are manufactured with a yeild strengh of 80,000psi along with a superior profile to provide a very strong and economical panel. The base metal is galvalume, which is a zinc/aluminum coating to prevent corrosion. We also offer a 30 Year Paint Warrantee which is rare in the industry.

These panels are our most popular sellers. They are manufactured with a yield strength of 80,000psi, and include superior profile to provide a very strong and economical panel. The base metal is galvalume, which is a zinc/aluminum coating to prevent corrosion. We also offer a 30-year Paint Warrantee (which is rare in the industry).

These panels are also popular and with a unique profile. They are manufactured with a yield strength of 80,000psi along with a superior profile to provide a very strong and economical panel. The base metal is galvalume, which is a zinc/aluminum coating to prevent corrosion. We also offer a 30-year Paint Warrantee (which is rare in the industry).

This panel is 16" wide and is also considered one of the best roof panels in the metal building industry. This standing seam panel is the ultimate in weather protection and panel quality. It offers a different profile than the Super Seam panels which will provide a different look. If you are looking for a top of the line roof system, this is it!

This panel is 24" wide and is considered one of the best roof panels in the metal building industry. This standing seam panel is the ultimate in weather protection and panel quality. If you are looking for a top of the line roof system, this is it!

All of our buildings come standard with self drilling / self tapping screws for all wall panels. They are also painted to match the wall color--giving the wall a real smooth finish.

Perfect for finishing off the inside of your building. Liner panels are available in 26 or 29 gauge steel for both walls and roof. Also available in many different colors.

Overhead doors come in large variety of sizes and colors. They can be purchased with low profile hardware where headroom is limited. They can be designed to meet the high wind loads (Wind Locked) of the coastal counties susceptible to hurricanes. Insulation may also be added as an option.

Roll Up doors come in large variety of sizes and colors. They can be designed to meet the high wind loads (Wind Locked) of the coastal counties susceptible to hurricanes. Insulation can also be added as an option.

Walk doors are available in a single or double size, and can be solid or half glass. Our standard doors are made of pre-finished commercial bronze, with solid core insulation and a complete hardware package. Also available are wind rated doors for high wind load counties. We also offer a complete line of hardware.

Windows come complete with framing and flashing in a large variety of sizes. Vertical and horizontal sliders are available. As an option, double pane glass is available.

Steel buildings are among the strongest and most durable structures largely because of the remarkable properties of steel. Unfortunately, like most metals, steel is a very good conductor of heat. In hot weather, steel framing and sheet¬ing rapidly transfer the sun's heat into a building, and in cold weather they rapidly transfer heat out. Steel buildings are also extremely susceptible to condensation, which can be a bigger problem than temperature. All these problems can be solved with the proper insulation and/or vapor barrier system.

Fiberglass translucent panels provide inexpensive, yet effective lighting through the roof or walls. Each panel is 3' wide and come in various lengths to suit your needs. Insulated skylights are available as an option.